...Klixon switch that mounts to the Evap coil. It sounds like the timer is working, because it will come back on after a time out. I would look for the klixon to be bad. Small switch with two wires that ...
...klixon switch that goes with it also may be bad). or the Defrost heator elements are not working. which means- maybe a circuit board or relay or just a wire has come loose. Remove all the food from ...
...Klixon switch, should have two wires running to it, and will be clipped onto one of the coil pipes. Make sure the wires are connected proper. You can try to put the Fridge in manual defrost buy ...
Question about Frigidaire Refrigerators
work ...this went for over three years. I finally googled it to death and found out all sorts of information. I called Maytag and they denied it. I fought with them. Finally they sent someone out. The
klixon) this is a switch that clips on to the tubing at the top of the coil if it is not still clipped to the coil try and re-clip it on to the line. If the klixon is loose that is the problem and the
...switch. If your not hearing a CLICK after 40 seconds or so then there can be a compressor PTC relay / thermal overload (KliXon) problem or the possibility that the run capacitor has failed. After all ...
switch/circut breaker every so often. what ya think? Oh my model is106.54216300 Hi, the click you are hearing is the klixon external overload relay on the compressor. The compressor is trying to start
...switch. If there is the klixon or the relay may be burn't out. change these first. if no joy after this get someone in to check to see if you have not/or loss any refrigerant. I suspect a loss of ...
25 questions posted
Usually answered in minutes!
1 Questions
2 Questions
7 Questions
0 Questions
2 Questions