QPS (QPCRW522452DB) CD-RW Burner "hard drives" Questions

...to replace the optical drive in a compaq presario c300nr laptop. How do I get to the drive? Hi. The hard drive cover is located at the base of the computer. To replace the hard drive: 1. Prepare the ...

...in a gateway desk top check for a open sata port on your computer. if there is one connect the hard drive with a SATA cable to the sata port on the motherboard. connect the sata power to the

installing hard drive on this model can i install an internal hard drive on this model. it looks like there is a place for it and there is an extra power supply plug-in. Hi, Sure why not. You,ll need ...

bad hard drive First - re-seat the hard disk and reboot the computer. If the computer does not boot up then reboot and go into the BIOS configuration to see if the BIOS detects the hard drive. If ...

...secondary port on your mother board IF YOU HAVE A SATA HARD DRIVE FORGET THE PARTS ABOUT HARD DRIVES ABOVE i assumed you had a IDE hard drive JUST USE THE SETTINGS FOR THE DRIVES and it should work

...hard drives or the H drive is a partition on the same hard drive as the C drive. You can change the partitions sizes on a single drive but not across hard drives. Also if you want to change the ...

where the jumpers are located. The jumpers tell the computer how to read the drive (every IDE drive hard drive, cd/dvd rom, floppy drive has them) the options are Master (meaning it is the main drive)

...drives on the same ide cable, one has to be set at master, the other as slave, the hard drive should always be the master. But you should'nt normally put a cd drive on the same ide as a hard drive as ...

DRW-1814BLT compatibility with IDE hard drive i have ASUS DRW-1814BLT dvd-rw, i have hard disk of 40GB seagate IDE interface. but my computer is not detecting it. is there any jumper configuartion for

everytime i plug my external hard drive my pc turns off your external hard drive might have been infected by a virus,, avoid double clicking the hard drive icon instead right click on it and then ...