Ricoh Aficio AP3800C Laser Printer "set print tray 2" Questions

...print the whole document from tray 1 or 2? HELP!!!! Have you setup for double-sided printing? Hi, I've noticed that sometimes in "Page setup" (assuming it is a MS word document you are printing), ...

...set to the right size. Press the Copy function key on the copier and look at the sizes shown for each paper tray -- are the paper sizes and orientations correct? If they are, check that the print ...

...print from bypass tray. Why? The printer is a Ricoh Aficio CL4000DN It may be something to do with the paper size settings on printer driver, document print settings or page setup. If for example the ...

...print a book on duplex but the registration marks don't seem to fall on top of one another. I have got the registration setup from side to side but the centre marks are about 2mm out of register. I ...

...out and fix it. you can change the tray setting in user mode to tray 2 and same time do not fill the tray one. same apply on print job from a computer, select tray two as default with print

...tray to make sure my print comes out the way i view it from Microsoft word? good lord help Allie Schoen When you go into the print properties in Word, you can specify the paper size that will be used ...

...print on plain paper? it says change tray 1 to size and paper and the same message for tray 2 but it not taking any size I set it to. try to check your document paper size settings. if your document ...

...to print. Also check to be sure the copier is set to recognize 8.5" x 11" paper -- it may be set for a different size. On the main Copy screen, if you select the paper tray, does it show 8.5" x

...tray 2. After about the 10th print in quality mode (slower) or 2nd print in speed mode, 10% of the ink is not attached to the paper. I have tried various brands of papers. I have tried various brands ...

...print a new document. I believe I must have inadvertantly changed settings, as I have had this printer for almost 5 years with no previously problems. When I go look at the setting in Paper Input - ...