...user code? My center has Ricoh Aficio 2018D that was used by a prior director. Ask for a user code. no one knows the code. How to reset? there is two ways to achieve this, either enter servisse mode ...
...user name= "admin", password = "password"...then enter all network settings...IP, DNS, POP,SMTP, etc. then in "address book" enter your destination settings. This is not a configuration that is easy ...
Question about Ricoh Aficio Office Equipment & Supplies
user cannot reset the error. Turn the main switch off and on. Reset the SC (set SP5-810-1). Enter the SP Mode by holding down "up" and "down" arrow for 10 s then you press "enter" Turn the main switch
Question about Gestetner Office Equipment & Supplies
...user codes on it and I don't know how to get past them to use my copier, can you help? Yes, you can delete the User codes. But first see if you also have administrator code. You have to know that ...
...know it was set up with User Codes, how do I shut them off. There are no internal user codes. User codes are only via the print driver. Is the correct IP Address, Subnet Mask, and Gateway Address ...
Question about Ricoh Office Equipment & Supplies
...user code but first of all i need to know if you still have the codes in the address book. If you activate that function without the codes on the address book no one can make copies. If you already ...
Question about Ricoh Office Equipment & Supplies
...know how to turn the code on but i cant seem to work out how to set the codes. you need to go to user tools, administrator options, then add users to the address book and in there u should see a tab ...
...know if there is any user code whitch can match with You can see the existing user codes in this machine please fallow the procedure: press usertoos/Counter button - then go to system settings and ...
Question about Lanier Office Equipment & Supplies
know how to by pass or reset the code Hi, you can turn off the key code management by going into User Tools. Press the User Tools/Counter button, then go to System Settings and then Admin Tools. There
Question about Sharp Office Equipment & Supplies
...know the key operator code, you can go to User program, this is done by pressing [C][INTERUPT] [C] then input the key operator code, when entry is complete "P" will appear in the quantity display. ...
107 questions posted
Usually answered in minutes!
267 Questions
215 Questions
218 Questions
178 Questions
117 Questions