...photoconductor units)? If so, one of the new units may be defective. Try reinstalling the old units to see if the problem goes away (after resetting the machine). If it does, you can replace the PCUs ...
Question about Ricoh Aficio Office Equipment & Supplies
...bad photoconductor unit (PCU), or problem with the transfer roller which is mouned inside the right side door. The PCU consists of 2 main sections; the development unit, with developer ang mag roll ...
Question about Ricoh Aficio Office Equipment & Supplies
...photoconductor. I just changed it a month ago. It has approximately 100 copies on it. I run into this problem with the CL2000 model as well. Are these just poorly designed printers? My users are very ...
Question about Ricoh Office Equipment & Supplies
...photoconductor. If you replace the charge roller (part #AD027018) that is probably going to take care of the problem.If that doesn't fix it, the issue could be a bad high voltage supply ...
Question about Ricoh Office Equipment & Supplies
...going bad. Do you have a service contract on your copier? It's likely time for a whole PM (preventive maintenance) procedure. The sc990 is probably caused by the copier's condition as well. Once you ...
photoconductor unit you do not need to remove the middle screw along the side (holds a roller in place), only the ones at each end and those on top either side of the yellow handle. And found printing
...bad ? Seems suspicious to me. Is there a way to reset the counter so this thing will go back to working until the part really needs to be changed ? Hi, the "Replace Photoconductor" message does come ...
Question about Samsung Office Equipment & Supplies
...going to be messy so do it outside. however, that has nothing to do with print quality backgrounding and fine lines come from the photoconductor and developer which are sometimes built into the toner ...
Question about Office Equipment & Supplies
...Photoconductor Unit I have a Ricoh CL1000n color laser printer. I have an error message saying replace PCU soon. The manual says that this message comes up after a certain amount of time, but ...
going bad, but If you want to clean the photoconductor, blow it with compressed air, there shouldnt be anything to "scrub" off. Just a dry cloth should get anything else. if it looks good, it may have
32 questions posted
Usually answered in minutes!
267 Questions
215 Questions
218 Questions
178 Questions
117 Questions