...Pressure roller fusing lamp When the fusing unit is not running in the Ready condition, the pressure roller fusing lamp keeps ON with full power for 100 consecutive seconds. Replace the fusing
Question about Ricoh Aficio Office Equipment & Supplies
...Fix it sc 541=Heating roller thermistor error (Fusing unit). The thermistors could be dirty or damaged. The fusing unit can be removed and inspected(without removing any screws)(Left door)(lower ...
...fusing unit. I put a fusing unit from a working machine but the error remains. Can it be fixed? To reset fuser SC codes you need to enter Service Programme Mode and reset SP5-810 to 1, then turn the ...
Question about Ricoh Aficio Office Equipment & Supplies
fix error Color registration could not performed When print the page colors appears light from the left to the right of the page gradually is usually yellow or blue and I do color registration, but it
Question about Ricoh Aficio Office Equipment & Supplies
...fix it. To reset error, enter SP mode by pressing: Clear (yellow) button, 1 0 7, and press and hold the Stop (orange) button for 3 seconds then switch off and on the copier. If the error is still ...
Question about Ricoh Office Equipment & Supplies
fix problems for error code sc 542 for ricoh 3510dn printer error sc542 1. Switch machine off. 2. Hold up and down arrows in while switching the machine on. 3. Select Service menu and OK. 4. Scroll to
Question about Ricoh Aficio Office Equipment & Supplies
...fix this problem would be most helpful. Also - it will not let us exit or clear from the message. Thanks! Troubleshooting tips: Enter SP Mode by holding down "up" and "down" arrow for 10 s then you ...
Question about Ricoh Aficio Office Equipment & Supplies
fusing unit located in the left hand door of the machine) is not warming up correctly. Is the copier installed somewhere cold? i.e. a garage? If conditions are ok and damp is not a problem, either the
Question about Ricoh Aficio Office Equipment & Supplies
...board defective ? Poor connection of the fusing unit It could need a new thermistor clean thermistor leak of toner waste drop to fixing roller clean lower upper check also thermostat and rset ...
...fix this? press clear (yellow) and press 1,0,7 and press and HOLD the stop button 5 secs. (red) press 1 when u see the copy sp mode and press 7 (datalog) and press ok, look for the sc/ jam counter ...
25 questions posted
Usually answered in minutes!
267 Questions
215 Questions
218 Questions
178 Questions
117 Questions