Ricoh Aficio 1515MF All-In-One Laser Printer "fuser unit copy machine" Questions

...Fuser at unit at Ricoh Aficio 2232c/2238c These machines use oil supply units located on top of the fuser unit. They are not refillable order another and replace... continueing to run this machine ...

fuser unit or if available fuser roller much better but if white lines just clean laser unit. another problem may contribute might be deform frame of scanning section includes mirrors and alignment of

...fuser unit is correctly set. You have two tabs on the end next to them are levers lift them, then pull on the tabs "C1" fuser unit(unit that gets hot) pull on them then the unit will come away from ...

fuser to let the unit know whether paper is there and there when it should or should not be. Sometimes, the sensor gets slightly dislodged and can actually cause a jam. If you are hearing a gear clash

...Fuser Oil Unit My Ricoh Aficio 2238c has stopped printing, and is giving me an error message to replace the Fuser Oil unit because it has run out of Oil. My question is, can I just buy the fuser oil ...

...Thanks ES...ASD There is a fault at your fuser unit (Heater unit).Check thermistors therofuse or thermostat, erro toner empty , aficio sp1000sf , plesa held order a new fuser unit thats the ...

...unit on the left side of the machine, I found out that the problem was on a black tray inside the main unit, under the fusers, it was pulled out just about a quarter inch. All that needed to be done ...

...unit has a maintenance schedule of 120,000 prints/copies. In other words, every 120K prints (i.e. 120K, 240K, 360K, etc.) This is approximate, sometimes you can get more or less from the parts. I'd ...

...unit but with the gears damaged......Buy a drum (image) kit. It will last you another 45k. Note that (in this machine) , you also going to need a fuser roller now and then . It lasts more than 45k if ...

unit and drum, but were getting dirty copies just like before. Now a new wrinkle has developed. If we set it on color, we do not get the dirty copies. If we set it on rotate/sort (in black and white),