...i start to switch the printer on it initializing then in displayed the error code SC_542 in AP2000 Turn off printer. Press the oline and escape button at the same time while turning on the printer. ...
Question about Ricoh Aficio Office Equipment & Supplies
Printer turned off and will not turn back on, Put new ink in, it did maintenance, started to print then just turned off and will not come back on. Try unplugging it and plugging it back in, then see ...
Ricoh printer full spc411 Ricoh Same issue Standard tray is full and it is not the exit sensor might be dirty. also try turning the printer off waiting a few minutes then turn back on.
Question about Ricoh Aficio Office Equipment & Supplies
GX5050N. Printer turns on. Then 5 seconds later, green light flashes and printer turns off. I am trying to solve this problem right now. Ricoh says it is mostlikely a short in the print head which ...
Question about Ricoh Aficio Office Equipment & Supplies
...printer is a Ricoh, Aficio 401. You need to go into user tools, system settings, admin tools and turn key counter off User tools, syster settings, key op, and turn off key ...
Question about Ricoh Aficio Office Equipment & Supplies
how i reset error sc 546 on ricoh aficio 4100n Turn the machine off, hold down online & escape, turn machine on and wait for "1.Service Menu" Select service menu, find sp 5-810, select #/enter, ...
Question about Ricoh Aficio Office Equipment & Supplies
I am unable to connect to my Ricoh Aficio 2051 I am trying to print to it and there is nothing. It turns on and will make photocopies, but it will not communicate with any computers in my office. How ...
whats error code sc 28212 Turn off printer remove carts wait 2 minutes but back in and turn on!
Fusing unit is not set properly I replaced the fusing unit and when I turn the printer back on, I get this message : "Fusing unit is not set properly". Any idea ? The old one and the new look the same
Question about Ricoh Aficio Office Equipment & Supplies
Printer turned off and will not turn back on was getting ready to print and just turned off Try unplugging it, waiting a minute, and plug it back in.
71 questions posted
Usually answered in minutes!
267 Questions
215 Questions
218 Questions
178 Questions
117 Questions