Ricoh Aficio 1022 All-In-One Laser Printer "polygon motor" Questions

...polygon mirror motor error. It could be caused by a poor connection or a faulty circuit board, but the most likely culprit is the polygon mirror motor itself. Replacing this motor (part #G0291961) is ...

SC320 Polygon motor error: Polygon motor Defective SBCU board Defective Or bad connection between them

...Polygon motor error After the main switch turns on, the polygon motor is not phase-locked in several seconds. ? Incorrect cable connection ? Defective engine control board 1. Connect the cable ...

...is already dead and you picked the code up on the web browser you need to replace the BICU as well. Do not replace the BICU without replacing the polygon motor. If you do you will pop the BICU

...polygon motor (laser), you will need to replace it, it is not expensive! CS672 control communication on start up, to many options, from circuit board to bad connection, you will need a tech for this. ...

...Polygon mirror motor, can you hear the motor starting up when you swith on the printer?it shoul sound something like an jet engine starting up, if you do not hear it then ask your local technician to ...

...Polygon mirror motor, can you hear the motor starting up when you swith on the printer?it shoul sound something like an jet engine starting up, if you do not hear it then ask your local technician to ...

ricoh mp7500 error sc204 Defective polygon mirror motor (Laser motor)

...polygon motor rotates. ? Dirty transfer belt contact sensor ? Defective transfer belt contact motor ? Disconnected connector of transfer belt contact sensor or motor ? Disconnected cable 1. Replace ...

...Polygon motor error The polygon motor does not reach its operating speed within 10 seconds after the polygon motor on signal, or the lock signal is not detected for more than 200 ms continuously ...