Ricoh AC104 All-In-One Laser Printer "td sensor abnormal" Questions

...TD sensor error test value abnormal the TD sensor output voltage is less than 0.5v or more than 5.0v after 10 consecutive times during copying the possible cause willbe TD sensor defective,TD sensor ...

sc 390 SC 390 TD sensor error The TD sensor outputs less than 0.5V or more than 4.0V 10 times consecutively during copying. ? TD sensor abnormal ? Poor connection of the PCU

...TD sensor error -Definition- [B] The TD sensor outputs less than 0.5V or more than 4.0V 10 times consecutively during copying. - Possible causes - · TD sensor abnormal · Poor ...

...un error sc390 TD sensor error Symptom: The TD sensor outputs less than 0.5V or more than 4.0V 10 times consecutively during copying. Possible Cause: • TD sensor abnormal • Poor connection of the ...

...TD sensor information (K) - Timing - When communicating with TD sensors, during printing process, or process control self-check - Condition - TD sensor output exceeds 4.5V or drops below 0.5V. ? Poor ...

sc 390 SC390: TD sensor error - Possible causes - · TD sensor abnormal · Poor connection of the PCU

sc390 SC390: TD sensor error - Possible causes - · TD sensor abnormal · Poor connection of the PCU

...TD SENSOR FAULT, CHANGED WITH ANOTHER 2ND HAND UNIT I KNOW WAS WORKING FINE BUT DRUM WAS WORN ON EDGES, STILL SAME FAULT? THEIR ARE NO SEAL BEEN LEFT IN UNITS. PLEASE HELP. ? Someone forgot to remove ...

...TD sensor abnormal · Drum does not turn · Development roller does not turn · Poor connection of the PCU Regards, the problem is in the development unit. check for contact points Its a ...

TD sensor error The BICU detects the TD sensor outputting abnormal voltage (less than 0.2 V or more than 4.0 V) 10 times consecutively. ? Defective TD sensor ? Loose connection of the PCU you may need