Samsung SCX-6320F All-In-One Laser Printer "print setting darkness light" Questions

......even if that is not the case, go to printer properties and change the setting....if there is no slide bar for heavy to light, then clik on toner saver, it should print  lighter than it does ...

...menu and raise the darkness setting. 1/ Check to see if your toner is low. Again go to the control panel and navigate to the status page and print out a page. It will give you the % left of

...print quality by redistributing the remaining toner in the toner cartridge. In some cases, white streaks or light printing will still occur even after you have redistributed the toner. 1 Open the ...

...enough printer will not print dark enough - have replaced ink and toner still too light to read model clx3160fn go to the print settings select the dark scale u can get print darker than the ...

...print too light labels are printing too light. Help. Test labels are fine... This could be caused by the darkness setting coming from the label software / printer driver. It's set too low and that ...

prints dark black instead of grey tones on all docs with grey tones prints them in dark black your drum is going bad. or your light or dark adjustment is set too dark ( it should be in the somewhat in

...print job is very light You can try setting that darkness in your menu for set up printing. That will make it darker. If this just happened after changing the ink clean the jets before setting the ...

...light-dark setting. I refilled ink but with no improvement. Being the light-dark setting has no effect I am hesitant to buy a new cartridge. Any comments would be appreciated. Bob Try cleaning the ...

...document darkness automatically but you may face many printing problems such like auomaically over dark, over light, heizzy, dull, etc etc. if you want to trouble free printing, please set PO-Cont to ...

...the why is my hp3030 printing light, even with the print darkness set to max. I'm using a new cartridge too. The Print head is dirty.Use the windows utlity or the hp utlity ro clean the head. Good ...