Samsung CLP-500 Laser Printer "dirty prints" Questions

...some reasons: 1. The Fuser is too cold, so toner was not fixed 2. Image Transfer Belt is defect or dirty Greetings from ...

...dirty print outs, there are repeated patterns of smudges. What can I do to get better copies? Too many things for just one solution, If transfer belt is worn out, you'll get that, color drums can ...

...reconnect. Otherwise it wont do nothing at all. It is soo annoying. the connections may be loose or dirty.or the driver has not loaded ...

...prints, it sounds like it's printing but it's not getting the paper and then light becomes red Sounds like the paper feed roller is either worn or dirty. It is located in the back of the printer just ...

toner (suspect leaking toner) if not solve3. Maybe your laser assembly/laser scanner got problem or dirty (need to replace or service

prints). Plus I'm replacing the yellow toner just a few weeks later after replacing the black toner. Any ideas would be greatly appreciated... The following can cause bands (vertical on a normal page)

...prints a black (or colored) 1 inch thick series of vertical stripes down the left side of the paper about 90% of the time. (Occasionally, I get lucky and no stripe appears at all). If I'm printing ...

...the toner and so on. I even took out the rod array lens and cleaned that as I thought I detected a dirty area. So, the inside is thoroughly cleaned. What could be causing these colored bands? More ...

Dirty Copies are printing Dirty copies have been printing. I've cleaned the machine inside and out. Now I must assume that a disposable part is neededing to be replaced. Which one or both - Drum or ...

prints horizonal lines that are 3/4 inch thick. when printing in black, it only has black horizontal lines printing 3/4 thick how do i fix this. i thought it was bc i needed new toners, but i replaced