Question about Samsung CLP Office Equipment & Supplies
series printer that I have replaced the Transfer belt and the Imageing unit on and it still says they need to be replaced. I have tried restarting, unplugging and turning off the unit but it continues
...series of pages, after the second print, the printer is leaving black marks across the paper There can be some reasons: 1. The Fuser is too cold, so toner was not fixed 2. Image Transfer Belt is ...
Question about Samsung CLP Office Equipment & Supplies
...series of vertical stripes down the left side of the paper about 90% of the time. (Occasionally, I get lucky and no stripe appears at all). If I'm printing more than 1 sheet of paper, it usually ...
...belt at the first shaft. He said that it was probably a bad series of the rubber. The print is stopped because the paper is transported too late, so the print is shifted to the top of the paper. I ...
Question about Samsung CLP Office Equipment & Supplies
...series Laser Printer I have the above printer and I keep getting error messages. Replace Transfer belt and replace Imageing unit. I have replaced both and I still am getting the errors. I have tried ...
...Series A laser printer which we really like. The problem we are having has recently surfaced after we changed the BLACK toner cartridge. There are skips and light area in the printing area where the ...
Question about Samsung CLP Office Equipment & Supplies
...series, and other Lexmark color printers use a transfer belt that has an internal `chip' that monitors use, and also triggers end of life. There is no way to reset this chip, you simply have to ...
...they are printed in 3 times. i take of the belt and replace again, but nothing ... What can i do ? You have changed the color registration by cleaning the belt. The regicon series will have to be
Question about Samsung CLP Office Equipment & Supplies
...belt motor (M18) was ON, M18 abnormality detection signal was continuously detected for the specified time. Reset your Toners and Imaging units for Minolta Bizhub and CF ...
...C3400 C3600 laser printers drum unit ... drum message you can install the chip on your drum unit and continue printing. ... Replacing the Transfer Belt on an OkiC3000 Series Printer - Duration:
133 questions posted
Usually answered in minutes!
951 Questions
374 Questions
221 Questions
110 Questions
74 Questions
