Samsung ML 2010 Laser Printer "cover" Questions

...how do i insert printer cadrige Turn the orinter off and follow these steps: 1) Remove the top cover by opening the top of the printer 2) Pull the older tone cartrige out, taking care of

I'm tyring to print but it keeps saying "cover ope... I'm tyring to print but it keeps saying "cover open" although no covers are open hi there is a sensor that check the door it is under the cover ...

cover closed but computer detects otherwise the printer unit fell to the floor when someone accidentally toppled it. the cover flew off then we attached it again. we managed to close it but when we ...

...4 screws for each panel and some very mild flexing of panel clips required. Remove in order: back cover (ease past power switch); top cover - have to lift to about 30deg at front; front cover ...

paper won't feed through. goes about 2-4 inches the stops no matter how many times i clear the jam. Hi If you remove the toner/drum unit and look into the back of the printer you will see the paper ...

how to change paper pickup gear HI, REMOOVE THE PRINTER BACK COVER & FULL BODY COVER ,PRINER BACK SIDE REMOVE THE CARDS &MECHANICAL BODY SIDE UNDER A SMALL GAPE IS 1 SOLINOIDE & 2 GEARS ...

I have a new ML-2510 printer. I installed the driver and tried to print, but it always says "cover open". I checked the cover. It's not open. This usually means the cartridge isn't all the way ...

...The load/remove light keeps blinking. checked paper tray, path. Removed tray, cartridge, back cover, turned machine off. No luck. any ideas? There is a sensor that is under the toner cartridge. ...

...when you ope front door,at the back 4 screws.the front where screws are they are 2 lugs holding cover wedge out and pull cover

...stopped working. No lights or any sign of life when plugged in and turned on. I disassembled the covers to try to get to the power supply but it got a little tricky for me so I figured I'd try ...