ML2250 Laser Upon turn on it groans and squeaks. This goes on for 10-15 seconds, then the noise stops and the red error light comes on. Could this be a bad cartridge? There is no paper caught in the ...
...scrapes off excess toner from the drum, it is slightly dry and causes the squeaking, technicians usually use a special powder that looks like baby powder to "lubricate" the blade, and stop the
Question about Samsung ML Office Equipment & Supplies
...stop squeaking? The most common place for these to squeak is the fuser, usually a bushing that holds the lower (pressure) roller has failed and the shaft is grinding against the frame of the fuser. ...
Squeaking My six year old PC-1060 is making a squeaking noise when I use it. Am I suppose to oil something? How do I make the noise stop? REPLACE FUSER
Question about Samsung ML Office Equipment & Supplies
...stop my phaser 3600 from squeaking? It seems to be squeaking from the back. Have you try to clean its gears? You can use some pressurized air (dust off), and a little of light oil (DW40) ONLY for ...
printer squeaks or squeal when moving paper If your printer squeaks or squeals then i would stop using it and call HP 800-474-6836 provide them your serial number so they can check to see if it's ...
stop squeaking as it prints. We have tried to lubricate the main rod on which the printer slides along, and yet still it squeaks....any suggestions? you know? that a sample problem!! you need to buy a
squeaking/sounds like they are "too tight" or needs oiling when printing. Can you tell me what to do to stop that annoying noise? This probably means the rollers are getting slick and a little glazed.
Question about Office Equipment & Supplies
...stop squeaking can you oil a samsung ml-1430 printer to make it stop sqeaking when it prints? It still works, but sounds like it needs something lubricated. Yes, lubricate the chrome shaft with light ...
...grease. Open it, and apply some common sewing machine oil onto the bushings. If the noise stops, you will need to repeat this every 2-3 months or disassemble the fuser roller and apply ...
61 questions posted
Usually answered in minutes!
417 Questions
373 Questions
283 Questions
276 Questions
130 Questions