Samsung SpinPoint SP4002H 40 GB Hard Drive "jumper settings" Questions

...jumper settings. 5. Find the jumpers on the circuit board of the drive. Jumpers are plastic plugs with metal sleeves that form a circuit between a pair of pins. Jumper locations are labeled on the ...

... how do I set the pins, master, slave or cable? Thank you If your using an external drive case, the jumper pins should be set at "single". If that doesn't work you can try moving the jumper till the ...

...won't boot when sv8004h is connected on as a secondary drive on the primary ide cable Check the jumpers (Little connector which connects two pins together) at the back of the drive, your second ...

...jumper setting for Master settings It should have a pin layout diagram on the back of the drive. The diagram shows the pins as if you're looking straight at them, so set the jumper as it appears in ...

jumper setting for slave drive there is no such master or slave setting when SATA is used. it is mainly used to tell the motherboard which one is master or slave when connected with IDE cable (PATA). ...

...I WANT TO CONNECT SP0802N HDD AS A SLAVE TO THE EXISTING HDD. PLZ HELP ME WITH THE SETTINGS Hi, to make a HDD as slave, put off the jumper out. for any question ask me. Thanks for your

Jumper settings i want a normal jumper settings on my harddisk Samsung sp0802N the junper setting on a hard drive are: Master - if this is the only hard drive in the computer, with the operating ...

...jumper settings and diagrams. http://www.samsung.com/global/business/hdd/support/userguide/Support_Setting.html this link will demonstrate all the jumper settings you should need. If you have any ...

jumper settings when used as a slave in a HP pavilion 6835 There are 3 pairs of pins: * MA(ster) * SL(ave) * C(able)S(elect) Move the jumper to connect the two 'SL' pins, if you want to use the drive ...

...jumper settings and diagrams. http://www.samsung.com/global/business/hdd/support/userguide/Support_Setting.html this link will demonstrate all the jumper settings you should need. If you have any ...