turn on the computer check for Led's on the computer If still no display ,shut down the computer,disconnect power cable. Open the computer tower,remove memory modules,reconnect power cable and turn on
Question about Shuttle Computers & Internet
turn on the computer check for Led's on the computer If still no display ,shut down the computer,disconnect power cable. Open the computer tower,remove memory modules,reconnect power cable and turn on
computer. Turn the power on at the wall, Flick the switch on the back of the computer (if there is one on the back) to the on position, make sure the cable is plugged in, and turn the power off at the
...turn on your computer press f3 continuously, and reboot your computer(restore or reinstall). plan b buy a windows CD,, can be windows 7 or windows 8,,, base on your computer's bit (32 or 64),, buy a ...
Question about Shuttle Computers & Internet
...turn on the computer each time you plug a device) 4. If it keeps on doing that, open up your computer tower (be careful to unplug the power cord and power cycle it to avoid static electricity) 5. ...
Question about Shuttle Computers & Internet
...to the surge protector. reset the surge protector. wait for about 5 minuets before you turn on the surge protector. then plug all cables that your remove from your computer the turn on the
Question about Shuttle Computers & Internet
turn on the computer check for Led's on the computer If still no display ,shut down the computer,disconnect power cable. Open the computer tower,remove memory modules,reconnect power cable and turn on
turn on the computer check for Led's on the computer If still no display ,shut down the computer,disconnect power cable. Open the computer tower,remove memory modules,reconnect power cable and turn on
...Turn off the computer and remove the wireless adapter and then boot up your computer, if it still does not boot up then the motherboard most likely been damaged. I suggest you take it to a computer ...
...computer? Turn your cable-modem (or DSL-modem) off. Turn your computer off. Unplug one end of the Ethernet cable from the network-port on your computer. Plug that end into the WAN port on the router. ...
12 questions posted
Usually answered in minutes!
42 Questions
26 Questions
28 Questions
23 Questions
19 Questions