Precor 9.27 Treadmill "belt moved" Questions

...moved briefly then stopped again. Console still shows that the track should be moving. do you hear the motor running but the belt is not? if it is the belt need tightened or the drive belt may have ...

...belt has moved to the right and slips. It slips sometimes when I am walking. Need to know how to move the belt back to the center of the walking pad. PROBLEM: The walking belt is off-center or slips ...

...go. Took the hood part off and the incline motor works and moves but it's not moving the belt to make the treadmill move. Belt is on and can manually move 1) LUBE the deck belt,you have a ...

when I power up my treadmil the belt does not move. If I step on the side the belt would then start to move until I move my foot. In order of most likely cause. 1) Worn motor belt needs to be changed.

...closer to the side rail about a quarter turn. Be patient and give it a minute to settle after you adjust it. Repeat until the belt has moved back to center. If it moves too far just back it off a

belt won't move I have tried the reset/off circuit breaker ....maybe I am not doing that right. DIsplays seem to work fine...I just ordered new keys from Sears for this 405E proform crosswalk...They ...

belt speed fluctuation And after I turned the two hex screws for adjusting the belt tension a quarter of a turn tighter, I only here a bump and no movement from the belt....I went a quarter turn ...

i have a proform xp 550s treadmill. The belt i have a proform xp 550s treadmill. The belt won't move. The motor sounds good, and the console works, but the belt won't engage to move change drive belt ...

Walking surface will only move very slowly. The belt seems tight enough, tried to tighten 1/4 turn, still not moving properly. Treadmill is a Weslo Cadence 450, bought a few years ago. Thanks lift the

How do I adjust the walking belt on my treadmill, it's going to the left? I need to move the belt to the right. Also, there are two adjustment holes one on top and bottom. Which one do I use? belts ...