2012 Jeep Compass Sport 4dr SUV 2.0L 4-cyl. 5-speed Manual "remove door panel replace speaker" Questions

...door speaker grille is damaged. I have a replacement, how do I switch them? Do I need to remove the entire door panel? remove panel for access. use panel removing tool (cheap) will save

...door lock. simply remove the cover if any over the stock speakers, usually some screws. once the cover/screws are off. the speaker should come off. You will see two wires off the speakers (the ...

...remove the door trim panel by pulling one door trim panel pushpin at a time from the inner door skin. Disconnect electrical connectors as necessary. Refer to Section 01-14A. Installation Follow ...

...door panel, then remove lock and window controls, then take flathead screw driver and SLOWLY pry panel off door. You now will have access to speaker. Speaker is held by 4 screws and wire harness that ...

need to remove the entire door panel? NO' YOU DONT NEED TO REMOVE THE ENTIRE DOOR PANEL, TO REPLACE SPEAKERS CONNECT WIRING CONNECTOR TO SPEAKER FIT SPEAKER BACK IN GRILLE AND REPLACE RETAINING SCREWS

...remove the door pull handle. Disconnect the electrical connectors. Slide a flat-bladed tool behind each of the retainers and twist the tool to disengage the front door trim panel from the front door ...

...remove the door panel. Work the speaker through the speaker hole in the door panel.7Locate the window bracket. It is a combination of metal arms holding the window glass in place. The arms form an ...

Remove inside door handle cover attaching screw and trim plate. If equipped with door mounted speakers, remove the speaker, and disconnect the speaker wires. For speaker removal and installation steps

...remove door panel to gain access to the speaker, or any other electrical component, absolutely disconnect the negative battery cable. Battery power is supplied to each door window motor and it?s ...

...remove the door panel to replace the speaker? There should be at least 2 screws that are hiden in the door panel. One around the arm rest and the other down by the light/reflector. Take those out and ...