...Connect the main speaker with the computer. 4. Press the 'ON/OFF' button. 4 The softwareIf you use a laptop make sure your volume settings are OK. Go to Start > Control Panel > Sounds and Audio ...
Question about Logitech Audio Players & Recorders
4 speakersToshiba A215S4757 lap top, and can't get them to play. I've checked the connections and they are correct. Thanks Found thru "tools' -"speaker settings" that the "stereo speakers" box was not
Question about Altec Lansing Audio Players & Recorders
connect my Altec Lansing ADA745 4.1 speaker system to an Acer AS5745-7247 laptop? Yes. Altec Lansing ADA745 4 Speakers can be connected to a laptop. Make the connections as follows Hope it helps! Good
Question about Altec Lansing Audio Players & Recorders
...4 ohm speaker will drop lower than 4 ohms.the average is 4 ohms because the impedance goes up and down depending on frequency. So if you say 4 ohms is the max. you don't want the 4 ohm speaker going ...
Question about Logitech Audio Players & Recorders
Connect speakers as follows: 1. Audio from PC, orange, green and black connecting to front right speaker. 2. DB15 (D-SUB) connecting to subwoofer, subwoofer is serving as mixer, power board, amplifier
connect 5.1 speaker to my new samsung lcd (series 4) whether it is possible? if yes then how i will connect it? please help me to convert my creative 5.1 speaker to home theatre will work if same type
...connect it with labtec speakers which are for my pc. Not sure if the TV headphone jack would give you stereo out, but you can try that. If it's 1/4" jack, you'll need a 1/4" to 1/8" adapter. If that ...
...Connect the right speaker to the red terminal, left speaker to the white terminal and the power cord will be connect to the power terminal. In the back of your computer you can see the three sound ...
Question about Altec Lansing Audio Players & Recorders
...speaker with the power switch. 1 . . 2 contacts 3 & 5 and 4 & 6 will be soldered together 3. . 4 solder a wire from 1 to 3 and 2 to 4 on power switch 5. . 6 bottom of circuit board Speakers ...
...Connect the speakers to out on PC, press carefully . 2) Go to control panel and see on multimedia , that sound is enable, and not in mute. pop up volume. 3) may be is defective speakers? go and RMS ...
60 questions posted
Usually answered in minutes!
890 Questions
738 Questions
516 Questions
420 Questions
338 Questions