D-Link DP 300U Print Server > Search
D-Link DP 300U Print Server printer port
use the software that came with as it acts as a port redirection rather than being able to use a plain ol' IP port. Then of course, the printer driver seems more touchy if this is the case. Sometimes when more...
you connect with an ethernet cable. When you connect the printer with an ethernet cable you are probably printing TCP\IP to the servers IP Address becomes the one you would use as the port for the printer object in Windows Printers & Faxes. more...
your reseller. CD-ROM (Software, Manual and Warranty) Before You Begin DP-300U Multi-Port Print Server Check Your Package Contents DP-300U D-Link Fast Ethernet Print as a laptop or desktop computer and a USB or parallel-port printer that will connect to the DP-300U. Important: TURN OFF the power more...
add the printer as local and set it to tcp/ip port the enter the ip addressee of the printer there and add more...
end of a straight-through CAT5 Ethernet RJ-45 cable into the "Network Port" (shown below.) Connect the other end of the cable to the you are advised to do so Next, make sure that the Printer is turned OFF. Using the USB cable or printer cable, connect more...
for network printing in Windows XP (continued) Click OK Input the port name of the port being used by the printer Select "LPR" Type in the IP address of the print server. more...
(continued) Click Next Write down on a piece of paper the Port name that you wish to use. For Windows XP: Go to Start>Printers and Faxes>Add a Printer or Go to Start>Control Panel> Printers and more...
Back to D-Link DP 300U Print Server page.
Sponsored Links
Repair Service
Find Print Server Repairman Near You:
= Poor
= Average
= Good
= Excellent
