D-Link AirPlus DI-614+ Wireless Router dhcp

in the address bar type-192.168.1.1>hit enter>and user name-- admin (lower case)password-- admin (lower case)and u can see the setup screen>there change the (Automatic Configuration -DHCP)--to PPPOEu can see a different screen where u need to enter the USER NAME >AND PASSWORD WHICH U GOT FROM UR AT&TAND CLICK ON more...

  D-Link AirPlus DI-614+ Wireless Router - Troubleshooting

• Rate this result:
• = Poor
• = Average
• = Good
• = Excellent

web pages that allows monitoring and control of STARGATE(home automation) and other controllers via the internet and local network. i assumed the modem /routers DHCP sent the ip address, netmask, gateway and dns settings to the module. When i input the ip address in a browser it does not more...

  D-Link AirPlus DI-614+ Wireless Router - Troubleshooting

• Rate this result:
• = Poor
• = Average
• = Good
• = Excellent

and the computer can ping the router there leaves only TWO thing: the wired settings for your router. Make sure they are all correct: DHCP enabled, your security settings are not too high, etc. !!OR!! Your internet setting are wrong on your PC... If your using IE make sure more...

  D-Link AirPlus DI-614+ Wireless Router - Troubleshooting

• Rate this result:
• = Poor
• = Average
• = Good
• = Excellent

August 2006 08:43:35 PM Unrecognized attempt blocked from 124.62.98.199:4660 to 194.204.98.140 TCP:139 Can you help? What is this unrecognized attempt? Could it be that DHCP is setting the wrong IP address to my PC? Thanks Prinz more...

  D-Link AirPlus DI-614+ Wireless Router - Troubleshooting

• Rate this result:
• = Poor
• = Average
• = Good
• = Excellent

you need to get into the routers settings and look for DHCP, and enable it so as to give your pc's there automatic ip addresses, also check in the general settings if it's a modem router more...

  D-Link AirPlus DI-614+ Wireless Router - Troubleshooting

• Rate this result:
• = Poor
• = Average
• = Good
• = Excellent

will be prompted to enter the passkey. In the routers settings(type the routers ip address in your web browser, depending on the make) ensure that DHCP is enabled to allocate ip addresses automatically, then reboot the router if neccasary. more...

  D-Link AirPlus DI-614+ Wireless Router - Troubleshooting

• Rate this result:
• = Poor
• = Average
• = Good
• = Excellent

This is what worked for me: My DI-524 router (firmware version 5.00) always said my NAT was "Moderate". I use DHCP and have UPnP turned on. Rebooting the router made no difference. On a whim I turned off the "Discard PING from WAN side" option more...

  D-Link AirPlus DI-614+ Wireless Router - Troubleshooting

• Rate this result:
• = Poor
• = Average
• = Good
• = Excellent