Singer 20u Sewing Machine "replace needle holder" Questions

needle holder correctly and tightened into the needle holder correctly.. if the needle was in the needle holder correctly and it's still hitting the bobbin carrage then the machine needs to be checked

...needle holder in my Euro-pro ep550 will not tighten to hold the needle in the machine. how ill i buy another needle holder to fit my machine my machine is a overlock serger and hold 2 needles but I ...

...bobbin holder to clean, when I replaced it the needle hits the holder. Is holder supposed to turn? Hi, sounds to me like you haven't refitted the bobbin correctly Regards ...

...needle and replace it with a new needle. Use the needle-holder tool (the little plastic stick with a small hole fits over the shaft of the needle.) Loosen the needle skrew and remove the old needle. ...

...replace the needle, now it makes noise moves everything but the top thread isnt moving its not feeding itself threw the needle???? please help....... is it possible that you didn't get the needle ...

...replace needle, loosen cup needle holder using flat screw driver,the needle has a flat surface which as you insert on holder needle shaft,slide on it besuse to coincide on flat surface of shaft ...

...needle holder correctlyall the way up into the needle holder--flat side of the needle to the back side of the machineif the machine still doesn't up the bobbin thread then it's possible that ...

...needle holder and tightening the needles up and that will let you know if the needle holder is working or not and if the needles don't stay up into the needle holder like their suppose to then the ...

...replace the left needle. It fits into the slot, but no matter how tight I tighten the screw, the needle still keeps falling out of the slot. Can you help? it sounds like the screw is stripped out or ...

needle keeps dropping out try tightening the screw on the needle holder and if that doesn't work you may have to have the needle holder replaced at a sewing machine shop