2009 Volkswagen Jetta "remove try wire" Questions

Remove a 93 Golf 3 VR6 Dashboard I have a question that I've searched all over the internet for and found no straight answer. The question is how do I remove the dashboard from my 93 golf VR6. I had ...

...seems like a nightmare, since all those numerous bolts are baked basically, and it will be tough to remove them. Trying to reach the two inner plugs also seems tough. Any idea how I should go about ...

removaul of engine I'm trying to disconnect the wiring harness and clutch cable so I can remove the engine both are giving me trouble. The wiring harness has what looks like a junction but I can't get

...remove the upper and lower steering column shrouds trace the airbag wire back from the airbag contact unit and disconnect it at the wiring connector remove the steering wheel by prying the horn pad ...

...try putting an volt/ohm meter in 12v position and find a chasis ground, put the negative lead on it. Second, remove connector from fan and sequentially take your positive lead and go from pin to pin ...

...remove one wire from a plug, replace that plug, reinstall the wire onto that plug and move on to the next plug. You don;t need to worry about firing order unless you plan on changing the wires or the ...

...try to remove the fuse , usually the light is on when the key is in ACC. double check the key position . turn it to lock position. Or the ACC wiring is still positive even though the key in lock. In ...

Help Bad The wiring for the switch runs out of the seat belt and down into the door. You'll have to remove the door panel to get to it

fan won't shut off I tried removing the relay switch and the fan shuts off. Put it back in, even on a cold vehicle, and the fan stays running. It stayed on yesterday after the car was shut off and ...

try to explain this best I can without pictures. To start, you will want to remove the connecting air intake hoses (BIG tube looking thing on bottom right of the top of the engine) it is clamped down,