Question about Hyundai Cars & Trucks
...Torque Specifications Fig. TORQUE SPECIFICATIONS all readings in ft. lbs. Year Engine Displacement Liters (cc) Engine ID/VIN Cylinder Head Bolts Main Bearing Bolts Rod Brearing Bolts Crankshaft ...
...and add oil until the correct level is established..... for the first oil change. Most likely 7 liters,but start with 5,run the engine to fill the oil filter,let it sit for 5 mins and recheck and ...
...moter Torque Specifications TORQUE SPECIFICATIONS All readings in ft. lbs. YearEngine Displacement Liters (VIN)Cylinder Head BoltsMain Bearing BoltsRod Brearing BoltsCrankshaft Damper BoltsFlywheel ...
...liter engine coup convertible. According to Chilton's the torque settings for the intake manifold are 168 in lbs. That just sounds way too high. Am I missing something? I was worried about going ...
Question about Toyota Land
what are torque specs for valve cover bolts on 2005 4.3 liter gmc envoy torque specs for valve cover bolts My info says 106 in lbs. Notice that is inch lbs not ft lbs.
...for 1.8/2.0L DOHC, 18Ft-lbs +90deg + 90deg +90deg torque specs camshaft caps for 2004 optra 2.0 ...
...1.6 liter engine Torquing the head bolts is done in 4 steps. step 1 14 ft/lbs step 2 36 ft/lbs step 3 49 ft/lbs step 4 retourque bolts 1 and 2 at 49ft/lbs. Use this diagram for the torque
...liter 4 cylinder engine WELL ..THE FINAL PASS ON IT IS 65 FT LBS YOU WANT TO DO THREE PASSES OF EQUAL INCREMENT'S LEADING TO 65 FT LBS STARTING FROM THE CENTER TWO BOLTS AND WORKING YOUR WAY OUT IN A ...
...liter head bolt specs 2.7 litre intake bolt torque spec in a 2008 dodge charger ... www.fixya.com/cars/t18664111-2_7_litre_intake_bolt_torque_spec_in Jun 27, 2013 - Head Bolts Step one 37 ft lbs then ...
lbs for 1991 3.0 liter engine am assuming its the head bolts-as per haynes man.- cylinder head bolts step 1-----59ft-lbs step 2------loosen one full turn step 3---37ft-lbs step 4----68ft-lbs naturally
39 questions posted
Usually answered in minutes!
1 Questions
2 Questions