2010 Toyota Hilux 3.0 "imrc open stuck" Questions

...IMRC STUCK CLOSED.NEWLY REPLACED INTAKE MANIFOLD AND INTAKE MANIFOLD GASKETS. check that the engine vacuum is operating as this is what opens/closes the IMRC valve(s) , all hoses are connected ...

...IMRC) stuck open (bank 1)Description - This DTC is set when the IMRC is commanded closed, but the IMRC monitor indicated open. This DTC replaces P1518 and P1537.Probable causes - IMRC monitor signal ...

...OPEN. POSSIBLE CAUSES. IMRC MONITOR SIGNAL CIRCUIT SHORTED TO POWER GROUND. IMRC MONITOR SIGNAL CIRCUIT SHORTED TO SIGNAL GROUND RETURN. IMRC ACTUATOR IS DAMAGED OR THE PCM HAS FAILED. - IMRC - IS ...

...Open) Possible Causes:IMRC control circuit shorted to ground or to system power (B+) .IMRC shutter valve actuator is stuck closed .IMRC vacuum hose is loose or disconnected. PCM has failed .From the ...

...IMRC) stuck open bank 1. Check the attached links,instruction and guides, Good luck "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if ...

...Open) The IMRC system is monitored for failure during continuous, key ON engine OFF or key ON engine running self-test. The test fails when the signal on the monitor pin is less than an expected ...

...IMRC closed but detects it open. Probable cause short circuit condition, damaged IMRC actuator or solenoid, blocked vacuum hoses. The car is running great, and RPM's are normal. code p 2004 has two ...

...Open) The IMRC system is monitored for failure during continuous, key ON engine OFF or key ON engine running self-test. The test fails when the signal on the monitor pin is less than an expected ...

IMRC's stuck open) or you get no power above 3000 RPM (stuck shut). Check the vacuum canister to see if, when you apply vacuum, it moves the arm that attaches to the butterflys. You just need a vacuum

...IMRC is stuck open, it is usually due to deposits in the intake manifold. Repair involves removing the upper intake manifold and cleaning out any deposits in the IMRC plate area. I would try running ...