2005 Toyota Corolla 1.6 "remove back light console" Questions

remove four screw on the side and top of the console,pull parking brake and slide the console up and back. Some console have electrical plugs!! Disconnect the plugs before removing all the way. On the

...to put all the parts back together including the ones throughout the console cover which did not need to come out in the first place. You must remove the center console. It is not too hard to

...back of the rear console and gently wiggle, pull backward and lift upward. Pull the hand brake so it is easier to remove the loosened rear console panel. 5. Use a flat head screwdriver to pry the ...

...off, remove the radio, and you should be able to reach back there and twist out the light harness, if not, you can take the hole assembly off by popping out the plastic center console cover. good ...

...Remove the 3 connectors from the back and then the cluster will pull out. There are 3 bulbs that control the overall lighting of the cluster. They are spaced about every third across the rear of the ...

...Hope this is helpful if not contact us back please. go to any auto parts stores buy haynes repair manual it will show you how to remove cluster and shift control console to replace 

...Remove them all. Note the cables for the instrument lights and speaker. Note the grommet around the ignition switch. You have to work this with a screwdriver so the top panel can come forward. This ...

...back and up. there are two screws exposed on the front console just in front of the emergency brake handle. remove those and you can remove the console. the gearshift lever must be in drive to clear ...

back, pull up to remove the parking brake console, seats rearward remove 2 screws from shift console, 2 pushpins each side, remove cupholders, lift and remove console. four screws to remove dial bezel

...only removed trim around the part and the A/C and air re-circulation indication lights work just not the back light for everything else ...