1995 Suzuki Vitara "dlc connector fuse car" Questions

...DLC connector and see if the ECU flashes a DTC error code, cranking for 5 seconds. release key, and not off, and see if ECU tells you why there is no spark , i can tell you 3 ways. not posting what ...

...dlc connector so scaner won't read codes Fuse #5 10A Data Link Connector (DLC) located in. Passenger compartment fuse panel The fuse panel is located on the left hand side of the instrument panel ...

DLC connector for B+ voltage . If no B+ voltage check to see if CIGAR fuse #13 20 amp is blown , location under hood fuse box . Do you know what the DLC connector is ? It's what you hook the scan tool

...for the DLC in a deville 2000 Typically the data link connector gets its power from the cigar fuse. On your vehicle there is a fuse in the underhood fuse block labeled ALDL (assembly line data

...DLC connector pins and what they do, check that pin 16 is always hot with 12 volts. If no voltage is present check the fuse for the cigar lighter or interior lights. Pin 16 at the DLC is powered ...

...DLC, and it says "operator error" (cannot communicate with computer). I checked all the fuses, and they're all good. Check terminal #16 (see diagram of connector) of the ...

DLC connector doesnt get any power when connected to a diagnostic tool check the fuses for the power outlet/cigarette lighter. The DLC usually gets its power from that fuse.

...is for cigarette lighter on toyota lucida It's the same fuse that powers the DLC (Data connector). Pop the cover top center of the dash board and check for power between pins 8 and 16 on the ...

lighter fuse in a 2001 Pontiac montana CIGAR/DLC/APO FRT 20A • Auxiliary Power Outlet-Front • Cigar Lighter • Data Link Connector (DLC) Fuse Block Right side of the IP, in the right front door opening

you Data Link Connector (DLC).  If the DLC has no power, the computer scanner will not communicate with the engine computer.Check Fuse #7 (25 Amp) in the instrument panel fuse block. (See diagram