2004 Renault Megane 1.9 "black plastic box" Questions

...fixture slides out of the hole. Lift out and remove the lens. It comes off the black plastic base by gently spreading the side. I assume you are replacing it with an led. Just reverse the procedure

...black plastic on black plastic, so bright LED flashlight helpful. Look for strip of black plastic about 1.5 inch wide by 6 inch long. Feel for release tangs either end of the cover, releasing one and ...

...black plastic piece with two T-20 or 25 Torx screws that need to be removed.Remove plastic piece. The Final stage is located behind the metal arm for the a/c door.R emove the floor heater duct for ...

...black plastic box, some are under the hood of the truck in another black plastic box. Generally speaking, the under dash one serves the inside of the truck, whilst the under hood one serves the under ...

...center most part of the engine(the intake) follow it from center of engine to the black plastic box.Some have metal clips that snap shut ,others have screws to remove.Inside will be your air

...black plastic box. Remove the lid and you should see an assortment of fuses and relay switches. A diagram explaining what each relay controls is attached to the lid. have you looked under the front ...

...black plastic housing. You have to take the glove box, dash, etc. to get it out. it is on the passenger side. Right on top of the black plastic housing. You have to take the glove box, dash, etc. to ...

black plastic "box" above the throttle assembly... Remove that to get to the throttle position sensor underneath. If you can locate the two wires that control the throttle assembly...then the throttle

...black plastic covers (both an external and internal black plastic one) Take a look at this video, I think it will help: ...

...black plastic "box" is called that is above the throttle assembly...but I had to remove that to get to the throttle position sensor underneath. If you can locate the two wires that control the ...