2001 Pontiac Grand Am "replace neutral safety switch 01" Questions

...neutral safety switch, then you disabled a safety feature. Replace the switch and undo the bypass to be safe. Someone ran their truck into my house because he had bypassed the switch and forgot the ...

...Neutral safety switch on the transmission. Suggest you take it to a ASE certified repair shop ! You would have spent less if you had right from the get go . Most likely your immobilizer has it locked ...

...Safety feature so people can't blow the engine up. In drive, you have 3 possibilities. The park neutral/range selector switch is bad, a bad wire( most likely power to the switch), or the PCM has died ...

...replace neutral safety switch. if i where you i would find the fuse for the starter and look at that first. if thats ok then find the cable going from the battery to starter, and hook up a DVOM ...

...neutral safety switch, starter solenoid, or possible a defective ignition switch but I doubt it. Can you hear the starter solenoid??? I'm willing to bet the problem is either with starter relay, ...

...sensor on the rear axle. The neutral safety switch and the EGR valve. If I were you,I would start with the Cat and EGR,then check the other stuff if you still have issues. Please rate this a ...

...neutral safety). Still inop. when the speedo works, the trans shifts perfect. With the speedo inop, get check engine light and trans goes into limp mode(2nd and 3rd gear only) All wiring has been ...

Neutral Switch need to replace as it wont start now how and what does it look like is it the one on the Left side of trans 2000 Mazda MPV LX 6 Cyl 2.5L Part number is: SAFETY SWITCH, Duralast F4062 ...

...NEUTRAL position only. Anti-Theft Relay (If Equipped) The anti-theft relay: is a normally closed relay. is grounded by the anti-theft system, which opens the relay contacts and disables the starting ...

neutral safety switch. The trans will not shift out of park even when wiggling shifter and depressing brake pedal. There no options to replace part need to bypass Bypassing that won't fix your problem