2006 Kia Picanto 1.1 "welding pops" Questions

have a 06-G6 that has a popping noise? has been in shop 3 or 4 times but the popping is still there I had a problem like this on my G6 Coupe. Turns out that the d'ship removed the front windshield and

how to replace the rocker panels? you will have to cut out with die grinder and pop the spot welds then replace and weld new one on.

HI Can anyone help? Whilst driving my 1999 audi a3 the clutch stuck to the floor after a popping noise. I found a small weld in the footwell along with a couple of pieces of plastic. There are no leak

replacing rocker panels does anyone know if you have to weld the rockers on or can you pop rivet them? you can rivet them or srew them in... will not look as good... you still have to cut them off ...

2003 Dodge Grand Caravan v6 3.8L is misfiring We just changed the spark plugs in my Grand Caravan and it popping and misfiring. What could be wrong? The wires were put back in the same place they were

boken trunnion 69178 trunnion mounts to table and ia used to change angle I used JB weld and a 4" piece of 3/4 X 3/4 x 1/8 aluminum angle .I used the JB weld to weld the broken tabs back on.Make sure ...

2004 ford windstar not starting after some welding work when the battery was disconnected first off why were you welding on this vehicle. Check your conections make sure they are tight on the battery ...

...cost. An alternative that has worked for some people is to use some nuts & bolts instead of re-welding, but it is very hard to access the backside to secure the

...out the popping sound was from the clutch pedal shaft breaking. We removed it and took it to a welding shop where it was repaired. Thank

in my 98 chevy malibu on the exhaust manifold where the r exhaust comes to the motor my exhaust looks like it just popped out of where it comes to the top of my motor. i think it was called a few days