2005 Hyundai Tucson 2.7 "wire car horn push button" Questions

...horn wire. Put the test light clip on +power, then check the wires on the collumn side one by one, pushing the horn button on each one. The horn switch is the wire that makes the light blink when you ...

...wire on the horn is getting the 12 volts when you push the button. Finally make sure the ground is good where the horn is mounted. If the ground is bad, run a ground wire from the engine block or ...

...horn on the dash to pass inspection. Simply run a wire form the + side of your battery to your push button. Make sure you put a 20 amp inline fuse in it. Then run a wire from the other side of the ...

WIRE LONG ENUFF TO GO FROM HORN TO INSIDE CAB BEAR BOTH ENDS HOOK TO HORN BUTTON ON OTHER SIDE OF BUTTON PUT OTHER WIRE BEARED AT BOTH ENDS HOOK ONE END OF WIRE TO BUTTON-N-OTHER END TO A FUSE IN FUSE

...no toot bad horn I should have said check fuse 1st but do that if no pwr at horn wire if the fuse is good and the horn works with the jumper most likly the horn button is bad. hope this helps good ...

...wire will be earthed to car body hopefully and the other wire will get plus 12 volts when the horn is pressed. or one wire is always 12 volts and the other wire is connected to earth when horn button ...

horn button. Next connect a hot wire from the battery directly to the horn. If there is no change the problem is probably a bad horn. The click you are hearing is probably the relay kicking in but the

...to do is, find horn,disconnect the wiring plug. and run a wire from battery positive to the horn itself. if the horn works then its in the wiring or the button itself. you may have to ground the

horn not blowing when button is push unplug a wire to any of your horns have a test light handy have some body push on the horn button if you see a light flash you have a bad horn if there is no light

...wire that goes to one side of a push button switch. Connect the other side of the switch to the metal chassis of the car, which is ground. A metal part of the dashboard frame will usually work.Then ...