2002 Holden Caprice "know sure torque converter causing" Questions

...know if you're familiar with the torque converter function/operation, but where it is a fluid (liquid) and not solid coupling with the engine, lockup is used at certain road speeds/engine RPMs to get ...

...know what position the driveplate needs to be in when connecting to the torgue converter??? In the manual it says to mark the driveplate when removing the transmission. I could not do this since I ...

...most common cause is the torque converter clutch solenoid which is inside the transmission. The only way to know for sure is to get it in to a repair facility and have codes pulled and some tests

be the torque converter clutch solenoid. I'm not sure of the exact syptom other than I know it dies. Does it jump at all then the engine dies as if the load from the engine is causing it to stall

...sure about a couple things first off where is this torque converter solenoid, two how hard is it to change or steps if ya know them, and three where can you buy one? If anybody actualy knows or has ...

sure how to go about fixin it i have the old torqu converter but i would like to know how to avoid this happeing again Have the vehicle on a level piece of road, engine running, transmission in 'park'

know what to do Thanking u in advance CHECK TRANSMISSION FLUID COULD BE LOW.DO A TRANSMISSION FLUID FILTER CHANGE IF NOT HAVE BEEN DONE FOR LONG WHILE.MAKE SURE BRAKE LIGHT SWITCH WORKING.BECAUSE WHEN

...sure now we know it wasn't a factory defective crank if the noise is starting again? Again thank you for your input in advance. Your comment of "mainly on take offs on inclines" indicates excessive ...

...sure to get a warrenty of at least a month to give you time for installation, and testing. Another cause could be the filter is dirty, and needs to be replaced. This should be done anyway, as you do ...

...sure to wear eye protection because you may never know what will happen under of a hood of a running vehicle. If level looks good, then check the condition of the fluid. Should be a clear dark to ...