2010 GMC Canyon Regular "lights work high beams" Questions

...lights only work with high beam on the 4 ways are the same with out the lights on when you turn on the right side signal the left works and the dash light on the heater come on only with the high ...

...not working Check to make sure the fuse is not blown. The fuse for the low beam and high beam headlights are in the fuse block under the hood. Each light has its own

turn signals inop & flashers. but if you hold in on high beam light switch everything works. Sounds like a bad multifunction switch.

beam works switch to high beam spot lights work power at all 4 lights but no high beam. high beam indicator light on dash works All 4 lights is HIGH beam. The 2 that come on in 'LOW' are the low beams

on my high beam headlights work good it just the left high beam stays on a dim light while on low but when on high they work good It could be driving lights mode instead of low beam. Check connections

...work (running lights still on), and the high would. When I'd start the car, low beams would work. I replaced the high/low turn signal assembly when it came in, but it didn't fix the low beams ...

...work on high beam. The blue light inside comes on to say that I am on high beam but the lights to not go to high beam. Do I replace the "dimmer switch" or the "headlight combination ...

...high beam lights are not 2001 Toyota Corolla both high beam lights are not working suddenly (as of this morning). Low beam lights remain on when switched to high beam. Dash board lights indicate high ...

...lights do work. I don't have an owners manual for this vehicle and i am unable to locate the fuse for the high beam lights there is no fuse for high bean light. the same light bulb that does ...

...All other lights work. Please help. Please reply to. [email protected] ot call eric at 808 212 3122. Thanks in advance for your timr. replace driver module relay .it controls the low beam