1997 Ford Puma "side door connect lock" Questions

...the passanger side. I have taken off the door panel and have access to the levers that seem to be connect ok. But I can not open the door Did you find a solution? I have the same problem with my

...side of the door lock relay through the door lock relay control circuit. Since the other side of the door lock relay coil is connected to battery voltage, the relay is energized. This causes the ...

...side door will not lock/unlock with the remote, but the other doors will. The driver-side lock was working with the remote before I pulled the plug that connects the door's wire harness to the car's ...

...side door cant lock i cant lock the drivers side door.i have to climb into the car via the passenger side and engage the cental locking via the locking switch,then climb out of the car and then close ...

...side is connected to the body control module (BCM). A lock function will occur when a door lock switch activation, keyless entry lock transmission, auto door lock function or a liftgate lock function ...

...side door locks not working at all. Only manually or with key. 2003 Toyota Camry: Both left side doors will not lock with the fob or from the driver side lock button. Only way to lock the door is ...

...side of the door lock actuator is connected to the normally closed contacts of the opposing relay to ground, the doors lock or unlock. The first place to start is have a factory or equivalent scan ...

...plug in at door lock switch by removing that panel from driver door.it may be that you have to replace that door lock switch .thers only one fuse for door locks and if pass side works, it's not

...side door of van does not open even when central locking is unlocked,the door cannot be opened manually either frrom inside,very occasionally the side door will unlock but will not lock again with ...

...side door doesn't lock or unlock with the remote. The rest of the doors work fine. Does the Driver side door lock and unlock from the lock switch inside? If not then you have a bad motor or bad ...