2004 Ford Mustang V6 "check engine light during acceleration" Questions

...check engine light comes on and off. Replaced spark plugs/wires, dist.cap, rotor, ignition coil, and checked timing. Thinking maybe the stator went back or O2 sensor/s might be bad. It sounds like it ...

...Check engine light also flashed briefly during hard acceleration. Dur While merging onto the highway when my car hit 3 and 4th gear the engine seemed to "stutter/misfire" during harder ...

...check engine light blinks several times and then goes off and stays off during normal driving. The light seems to come on as I hit 3rd or 4th gear during heavy acceleration? Any Ideas? Oil level is ...

...check engine light is on and it often shakes when stopped. If I put it in neutral, it stops shaking. It also shakes a little during acceleration and when I accelerate harder, the check engine light ...

...engine light comes on during acceleration at about 50 in fourth, then power is reduced presumably by limp home mode. Error codes P0108 and P0237 are generated. Car can be reset by re-starting until ...

Check engine light is on and my car hesitates when accelerating. Sometimes the check engine light will blink (instead of just stay on steadily) during moments of hesitation/acceleration. When a ...

...3 days ago, no change. could be the type of plug you are using.I was told only to use ngk plugs.I recently put bosch plugs in my mazda 3 and the check engine light came on and it started

...check engine light and has a "small vacuum leak code" associated with the light. its drawing too much air in to the intake bypassing the injectors/air flow sensor check the inlet manifold ...

...check engine light only illuminates when the engine surges under acceleration. Sounds like a sensor Is faulty. Possibly It got banged by something or someone during its last repair. When accelerating ...

Check Engine Light Flashing During Acceleration/Rough Idle @ Stop I have the same problem. Two months ago I had a check engine light and after taking it in the engine temp sensor needed to be changed.