1999 Ford Mondeo "3 water pump" Questions

Ad

Question about Ford Mondeo

1 Answer

3 weeks ago due to the overheating and all seemed ok,but now the car is overheating yet again.It stays at normal for a short time and then almost reaches the red overheating warning.We have no idea if

Ad

Question about Ford Mondeo

1 Answer

...3. Loosen the water pump pulley bolts. 4. Remove the drive belt. 5. Remove the water pump pulley bolts. 6. Remove the water pump pulley. 7. Remove the water pump bolts. 8. Remove the water pump. 9. ...

Ad

...3. Loosen the water pump pulley bolts. 4. Remove the drive belt. 5. Remove the water pump pulley bolts. 6. Remove the water pump pulley. 7. Remove the water pump bolts. 8. Remove the water pump. 9. ...

water pump (4). 3. O-ring (3) and clean the seating area. To install: Fig. Exploded view of the water pump mounting-2.0L (AEG/AVH/AZG/BDF) engine Install or connect: 1. O-ring, moistened with coolant.

...5 bolt or a 3 bolt pattern Really depends on the engine you have. If you have a 3.3 L engine then the water pump is a 5 bolt pattern If you have a 3.5 L engine then the water pump is a 3 bolt

Question about Ford Mondeo

1 Answer

...3. Install the water pump pulley.Loosely install the mounting bolts. 4. Install the drive belt; this will help hold the pulley thentightening the pulley bolts. 5. Tighten the bolts to 25 Nm (18 inch ...

Question about Ford Mondeo

2 Answers

...3) to remove the water pump (1) and gasket (2). Install the water pump gasket (2). Install the water pump (1). Install the water pump bolts (3). Tighten the bolts to 10 Nm (89 inch lbs.). Install the ...

...3. Install the water pump pulley, then tighten the bolts to specifications. See TORQUE SPECIFICATIONS . 4. Connect the coolant hoses onto the pump. 5. Install the water pump drive belt. 6. Fill the ...

...3 Place the new water pump gasket on the water pump mounting surface. 4 Slide the new water pump into position and reinstall the mounting bolts. 5 Reconnect the bypass hose by sliding the hose over ...

water pump sealing surfaces, then apply a 3/32 inch of RTV sealant to sealing surfaces. While RTV sealant is still wet, install water pump. Tighten attaching bolts finger tight. Install lower radiator

Not finding what you are looking for?
1999 Ford Mondeo Logo

126 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...