1998 Chevrolet Astro Van "jump cables" Questions

Died suddenly and not starting Died suddenly; wouldn't start; jumped on the bumper and started a few times; Died again and jumping isn't working now New battery just check your cables ...

jump the car without opening the hood.Jack the vehicle up on the starter motor side.get a jumper battery and jumper cables.with the jumper cables connect the positive terminal of the jumper battery to

...starter good new grnd and hot cable when you turn switch to crank wont do anything tried to jump start still nothing could it be a bad starter relay or what im not sure what you are

...jump it off. But as soon as I unhook the Jumper cables it dies. a dead battery and the alternator not working will cause this.. the engine requires a minimum 12.5 volts to run the computer..if not it ...

98 chevy astro battery or alternator my astro would just not start one day. i jumped it and took off the negative cable from the battery and it stayed running in idle, but when i revved the engine it ...

...jump from a neighbor, same noise. His guess wan not that the starter was dead, but needed to be "tightened" or something because is just wasn't turning the engine over. Van worked fine the night ...

...from the alt to the starter without having to remove the alternator? Yes, If you have a volt meter, jump and start engine, with engine running you should have approx 13.5 to 14.2volts that would tell ...

no power in part of fuse box under the hood and inside the van checked all the fuses and some have power some dont van quite going down the highway checked lots of conections a fuse terminal this has ...

...wire and ground (the starter body). If you read 12V and the starter doesn't operate, with a jumper touching the (+) battery cable and the smaller terminal on the starter solenoid, but the ...

...jump start it Get a set a battery cables. Attach red cable to positive post. Attach red cable to posit post of the jumping car that is already started. Next attach the black cable to the car that is ...