2006 Buick Lucerne CX "hose socket" Questions

hose off, or drain from drain plug. antifreeze is what you are draining. Then get a 15 mm rachett and socket and pry tension pully back so you can remove belt. unbolt water pump and take off. Once off

...socket. 5Follow the upper radiator hose towards the engine to locate the thermostat housing. 6Disconnect the upper radiator hose from the thermostat housing. Use a pair of rib joint pliers to loosen ...

...Then , once you have it in close to the plug hole, simply spin the hose to get it started in the hole. Once you have it as far as it will go with the hose, remove the hose, and tighten with a

...hose can explode. you will need a 12 or 13mm socket to undo the line at the caliper and I think a 10mm wrench to undo the line at the other end of the hose. you will also need to use a 8mm I think ...

...hose off ,no plug should be somewhere on bottom of radiator and you may need to use a socket extention bit "not a socket" but the part that goes into a socket to remove it. or a easier alternative to ...

...Hi, I have a ford taurus 2000 3.0 lt, the dpfe broke in the ref tube, but I disconeted the vacuum hose and now I don't know where connect the vacuum hose, the metal tube have 2 vacuum sockets, and ...

...hose. i would put the car on car ramps and put a brick or something behind the back wheels for security and then you will need an screwdriver or a socket to remove the clamp and normal you use the ...

socket. 5 Follow the upper radiator hose towards the engine to locate the thermostat housing. 6 Disconnect the upper radiator hose from the thermostat housing. Use a pair of rib joint pliers to loosen

socket. Then pull the hose off the pump and let the steering fluid drain into the pan. 7 Detach the pressure hose from the steering pump by unscrewing the retaining nut at the pump using a tube wrench

...socket. 3 Thread the transmission cooler line fittings into the radiator. Tighten with a wrench. 4 Slide the lower radiator hose onto the fitting on the bottom of the radiator. Slide the hose clamp ...