Brother LS 2160 Sewing Machine "thread bunching underneath" Questions

...thread is bunching up the machine is making a clicking noise and the bobbin thread is tangled and bunched up hi Lois. this is all i could find out. Check Your Tension Settings. Looping underneath the ...

...thread bunches up underneath I use the correct thread also have cleaned it re thread and change tension but still after a few stitches it bunches up underneath try changing the needle make sure the ...

numbers. These links may be helpful: Sewing Machine Thread Bunching Up Here Why 5 Common Causes of Birdnests Why Do Get Bunched Up Thread Under My Fabric WHY IS THREAD BUNCHING UNDERNEATH MY FABRIC ..

...thread bunching up underneath My machine used to work fine. It was then put away while we moved and got sorted ect. I got it out the other week to use and now all it is doing is bunching the thread ...

bunching and knotting from underneath The thread just bunches underneath and seems and is caught around the metal hook check there is no dirt in tension discs and that there is tension on needle ...

...thread is bunching up on the bottom of my project, was working fine, needle broke, I have re-threaded and still bunching up and freezing my project, please advise increase the needle thread tension ...

thread bunching on model singer 2157C I have tried to adjust the tension on my machine to avoid bunching but I have had no luck. It is set on the highest setting and changing the number of stitches ...

...tension is off ?? bottom thread bunches underneath side of fabric when sewing. Sounds like it could be! Probably worth trying to readjust it. Are you using a fine fabric too? That can cause

thread bunching underneath when i sew it will do fine then suddenly make a noise then the thread is all bunched up underneath. clean the lint out with canned air and check the bobbin holder for any ...

THREAD BUNCHING UNDERNEATH MY FABRIC ? ' eBay www.ebay.co.uk/gds/WHY-IS-THREAD-BUNCHING-UNDERNEATH-MY.../g.html.. or you could go to this link and see if it helps you out.. thread keeps looping Google