...battery. This will be a signal to the camera, to start all over again, when the battery is placed back and the camera is switched on again. In your case, the camera indicated an error with the
...of the suggested solutions worked for me and my Elph 300HS. However, I took it apart, removing the back. There was a screw inside holding on the front panel which I could not budge no matter what,
where is the serial number located Usually on the bottom near the back, or on the black part on the back where the rear element is
17 to 85 EFS IS lens with issues. Auto focus bounces back and forth and wont lock in. When it does work, Im getting intermittent error message saying that lens and camera body are not communcating. It
...You did check the Manual/ Autofocus switch on the side of the lens, yes? Maybe move it back and forth a couple times? Is there a Macro switch on the lens? If so, adjust the lens-by hand- ...
...are 3 rings, 2 quite rigid and one flexible - so now I don't know the correct order to put them back. Thanks for your help! Gerard The order doesn't madder, Just make sure you put all of them
...assembly has popped out. Luckily, this repair does not require and parts. The linkage just slides back together. Take apart the lens starting from the back. After removing enough parts you should
Can you get a digital back to covert it into digital Hi. No. I had never see somethig like a digital back for a film camera like this. The digital backs made from companies like LEAF and FACE ONE, had
cant open camera to get film out its a minolta srtmc 2 Hey stupid 01, To open your camera back you need to pull up on the rewind lever knob (on the left side of the camera with the lens pointing away ...
Question about Samsung Cameras
...was dropped and it say the zoom did not operate normally zoom wont operate normally Pull gently back and forth on the lens while in outward position. Do this several times until you hear a click. ...
3 questions posted
Usually answered in minutes!
1 Questions
1 Questions
1 Questions