Lowrance LMS 332c Mapping Sonar/GPS Receiver "power button" Questions

...power button right into the lock position. 3. Slide the power button to the left and hold it for 10 seconds. 4. Your unit should have powered on after you released the power button Solution B: 1. ...

...Press and HOLD power button 2) While holding power button, press in RESET button 3) While still holding power button, release RESET button 4) Continue holding power button, you should see TomTom ...

power button while pressing reset button Release reset button while still pressing power button Device should start, hold power button pressed until you see white text on screen, last line should read

power button take an eye glass flat head screw driver and pop the power button out there should be a rubber button the is pushed in and not touching the buttonpop out the rubber button and put the cap

...power button was functional, but none of the keypad buttons or joystick did anything. Power On/Off and Key Lock/Unlock - Press the Power button located at the top right of the Sky Caddie to power ...

...power button. which is located top right of the device. If this doesn?t work, you can reset your device. To do this, press and hold the Power button for fifteen seconds. Release the Power button when ...

...power button, and the unit will turn back on." THANK YOU SOO MUCH! That worked perfectly! diggs234567 saved the day! press "mode" and "reset" at the same time. Let go and then press the power button. ...

...power button as a reset. With the unit turned off, hold down the power button for approximately 15 seconds, until the TomTom turns on. As soon as the unit turns on, release the power button. The unit ...

...power button, the only thing that happens is a beep , no screen appears. Also is it came to me with no data card. Push the power button to turn it on then count to 5 then hit enter. Then count to 5 ...

power button does nothing. It's just dead. Is there a solution? I had the same problem with the go 920, I thought it was broken, Solution was to insert pin into reset hole for 15 Sec, after which hold