Question about Toshiba Satellite Computers & Internet
...were playing with this old laptop and pushed the power button in too far. I have removed the faceplate that covers the power button, however when I try to reinstall the power button, their ...
Question about Toshiba Satellite Computers & Internet
...it in place isnt loose or missing. Try this as a test: shut down the laptop. Press and hold the faceplate of the drive. While holding the faceplate, turn on the laptop. See if Windows detects the ...
Question about Toshiba Satellite Computers & Internet
...1 screw in the bottom of the notebook that you will have to take out and then get in behind the faceplate on the dvd and wiggle it out of notebook and then put it back in and make sure it is ...
Question about Toshiba Satellite Computers & Internet
...$50. There is only one screw holding it in and an easy bracket to switchover to the new drive. The faceplate won't line up nicely like the original most likely if you go third party. Of course if ...
Question about Toshiba Satellite Computers & Internet
...the whole body cleaned out down into the motherboard. Lastly, you can carefully remove the monitor faceplate with the screws hidden by rubber buttons, and then look at the electronics on the bottom ...
how do i open disc drive door If the door's button (faceplate's button) is not working, then you can use a paper clip. There is a small hole somewhere on the faceplate, and you can insert the paper ...
Question about HP Computers & Internet
how to change faceplate on LightScribe SuperMulti 8X DVD R/RW with Double Layer Support in hp pavilion how do I remove the face-plate on a LightScribe SuperMulti 8X DVD R/RW with Double Layer Support ...
Question about Toshiba Satellite Computers & Internet
...station? how do I open it? check there is lock on it.then unlock it then pull the cd rom. The CD faceplate should have a button which will open the tray (if the power is on) or you should be able ...
Question about Toshiba Satellite Computers & Internet
...drive face plate from the old drive. It can be removed by working it back and forth to loosen the faceplate. Once it is loose you should be able to pull the faceplate off. Do the same for the new ...
cd-rom would not open there is a small hole in the faceplate of the CD ROM. Find a sewing needle or straighten out a paperclip and push it into the hole until the CD drive opens.
36 questions posted
Usually answered in minutes!
1,650 Questions
1,307 Questions
1,252 Questions
1,162 Questions
1,043 Questions
