...new one, then slide it back into the laptop 9no need to install screw just yet) Start laptop. If error is gone and DVD plays OK, insert the screw again and make your old tray cover fit the new drive ...
install new hdd toshiba a15-s157 I bought a new western digital 160 gb 2.5 internal ide ultra 100 hdd. I think I know how to remove the old drive and install the new one but what di I need to kow ...
...new window appears, and displays whether the device is working properly. If there are any errors, click the "Troubleshoot" button and follow the given onscreen instructions.Check the DVD that you are ...
...new paste to the top of the processor and replace the heatsink, securing it evenly with the attached screws. Possible Virus and Malware There is a good chance that you have a virus or malware that is ...
...new computer, they have most definitely stored a copy in your hard drive for later use. You can easily access this copy of the CD on your hard drive to completely reinstall or format partitions on ...
...etc )from right to left.remove 2 screws securing keyboard.you will see one screw that holds the cd/dvd rom in place.remove screw,pul on tray carefully, cd rom will slide out. replace with new cd
will find a screw that holds the CD/DVD in place, once you have removed the screw pull gently on the tray and it will slide out and you can install the new drive. Good luck and thanks for using FixYa!
...new CD-ROM drive or you have moved the computer, it is possible that the power to the CD-ROM may have become loose or disconnected. Check the cable connections. Bad eject button If you are running ...
Question about Toshiba Satellite Computers & Internet
...install the new cd drive, (Player), just reverse these steps. [Open drive tray. Slide CD drive in. Replace screw] Hello there: On my compaq i just did mine and i had to first remove the strip above ...
Question about Toshiba Satellite Computers & Internet
install some new drivers. The replacement drive is a sony/nec brand purchased from Newegg. turn it off, and flip it over and theres a one screw in the center, just remove that and then straightnen out
74 questions posted
Usually answered in minutes!
1,650 Questions
1,307 Questions
1,252 Questions
1,162 Questions
1,043 Questions