Lowrance GlobalMap 3500C GPS Receiver "power" Questions

GPS module not responding icon say's gps module not responding, checked all connections, powers up, shows maps,but will not lock in on satellites. need help. there may be some code lost in your module

...comes on by itself and beeps and the screen flashes. You cannot turn the unit off with just the power switch. I have to press Menu and Pwr together (???) but it is only a short fix as the unit ...

was working fine,then i get mess.gps module not responding ??? Model 3300c work fine for several yrs now a grt mesg. gps module not responding???? hi,your gps module-antenna is powered into 12 volt ...

Garmin C330 resets itself My C330 will power itself off and right back on after a few minutes of use, with the power cord attached or not. It will also power itself on, without being touched when the ...

..."LAP" I assume you mean laptop or notebook computer. Some computer USB ports do not have sufficient power to charge (or operate) devices like cellphones, GPS, large external hard drives, etc. You may ...

My nuvi 780 suddenly won't power on. Used it this morning and then a short while later it's broken! Solution A: 1. Disconnect from power source (automobile cradle and/or usb cable) 2. Slide the power ...

POWER SWITCH DOES NOT ILLUMINATE GPS SCREEN WITH 12VOLT PWR. Have Navigon 2100 GPS purchased about 3 months ago. When unit is plugged into 12volt power the units power lamp lights on the GPS and ...

cant get my nuvi 260 to work If the device does not power on it could be a result of a extremely low battery. Please ensure that the device is receiving a charge while it is connected to the vehicle ...

Garmin Nuvi 300 does not switch on. The wrong charger was used 1. If using the power/data cable to power your device: Make sure you have power at the source it is connected to. Check the fuse in the ...

Lost power- will not come back on I was using my Roadmate 700 when the power went off. This has happened before when the power cord pulled out-but simply replacing the cord end back into the ...