Toshiba (HDD2181) (hdd2181-50pk) 30 GB Hard Drive "slave hard drive" Questions

Ad

Question about Maxtor Computers & Internet

2 Answers

...hi frined remove your hard disk jumper & u r hard will be slave PLACETHE JUMPER IN THE MASTER AT FIRST POSITION AND REMOVE ALL JUMPERS FROM YOUR SLAVE DRIVE IT WILL BE DETECTED AS SLAVE...

Ad

Question about Seagate Computers & Internet

1 Answer

...slave hard drive? how to make this device IDE slave hard drive? Seagate U6 (ST340810A) 40 GB Hard Drive You can make it slave with jumper settings check in back side of harddrive you can see jumper ...

Ad

Question about Samsung Computers & Internet

1 Answer

how to slave hard drive? To configure the hard drive as a slave drive, you need to set a jumper on the hard drive to SL (slave) The other jumper settings are MA (master) and CS (cable select).

Question about Fujitsu Computers & Internet

2 Answers

...slave hard drive do I need to add I am adding a slave hard drive. Do I need to add a jumper to my existing master fujita model mpf3102at hard drive at the slave present position. I would then have ...

Question about Western Digital Computers & Internet

2 Answers

...hard drive as a slave drive. Hello, You should have a jumper configuration written somewhere on the front (up) side of the hard Disk ... Look there, or look just around the Pins... Look for M, S, CS ...

Question about Samsung Computers & Internet

1 Answer

...hard drive to SATA 1 slot at Motherboard and id you want to make the hard drive as slave just connect your hard drive to SATA 2 slot at *********** board i hope this helpful thank you for using ...

Question about Seagate Computers & Internet

3 Answers

...slave. If you only have one hard disk, select master and for two drives, new drive will be the main drive, set the jumper to master, if you want it as a secondary drive then set it to slave. ...

Question about Toshiba Computers & Internet

1 Answer

...Hard Disk as a Slave b> An SATA hard drive is an internal hard drive that connects to your computer's motherboard. It is even possible to connect multiple drives to the same computer; however, only ...

Question about Excelstor Technology Computers & Internet

1 Answer

...is the jumper setting required? To configure the hard drive as a slave drive, you need to set a jumper on the hard drive to SL (slave) The other jumper settings are MA (master) and CS (cable

Question about Maxtor Computers & Internet

2 Answers

...slave hard drive? Hi, setup the first drive as slave ( sometimes No Jumper ) then the furthest away drive as Master. If this fails, and you have 2 IDE Slots on the motherboard. ( Primary/Secondary ) ...

Not finding what you are looking for?
Toshiba (HDD2181) (hdd2181-50pk) 30 GB Hard Drive Logo

11 questions posted

Ask a Question

Usually answered in minutes!

Top Toshiba Computers & Internet Experts

ExpressFiX
ExpressFiX

Level 2 Expert

691 Answers

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Toshiba Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...