Singer 7258 Sewing Machine "winding bobbin needle disengage" Questions

...winding bobbin so needle moves up and down Loud noise while winding bobbin. The issue you are describing with your Singer 9960 bobbin winder could be caused by a few different things. One possibility ...

...it? Most operate on a simple system where a rubber wheel on the bobbin winder comes into contact with the handwheel (under the cover) ... the handwheel is disengaged so the needle has no

needle to wind the bobbin. i need help with my Jones 936. No instructions and i can't figure out how to disengage the needle to wind the bobbin. Please refer to the attached information:http:/

...bobbin winding gear for Pfaff 7570? The needle is still engaged when I try to wind the bobbin. To disengage the needle while winding a bobbin do the following: the handwheel on the right end of the ...

...bobbin winding steps for your particular model. On some machines there is a knob in the center of the hand wheel that is loosened for bobbin winding - this also disengages the movement of the needle. ...

needle so it doesn't go up and down whilst you wind the bobbin up, on most machines you have part of the main drive wheel (on the far right) which turns against the rest of it, disengaging the part of

winding bobbin the needle doesn't disengage and the matching makes a dreadful grinding noise as it winds the bobbin Try putting a small drop of oil on the the metal shaft of the bobbin winder if it is

...bobbin winding on an older Kenmore (the knob in the center of the handwheel is turned counterclockwise to disengage the needle bar). When finished bobbin winding, be sure to tighten the knob ...

...counter-clockwise to disengage the needle during bobbin winding. Your machine may have a safety that prevents bobbin winding while the needle is engaged,. How to wind Bobbin on Bernina machine ...

...winding a bobbin. Shouldn't it release somehow so the needle doesn't move? if your machine has a clutch in the center of the turn wheel you must loosen it to disengage the needle before winding the ...