Linksys Wireless-G Broadband Router "wan socket" Questions

Wan socket We had a series of power fluctuations that affected our WIFI router. The WAN lead ceased to light. I checked the cables first if its cable related. I was able to use them without fail using

needs power and the router plugging into the line via the line socket. A Ethernet cable needs to plugged into one of the WAN ports to configure the router, the other end needed to be plugged into a pc

type, the broadband modem is connected to the Dynamode WAN/Internet socket with a RJ45 LAN cable. If you have a broadband DSL modem you need a RJ11 phone cable to connect the moden to the phone socket

...socket Feb 24 00:08:50 2009 System Log [pppoe] sending PADI --- Looks like your "modem" is actually a gateway, as is common with DSL devices. It's acting like a modem and a router. So you're actually ...

...WAN socket and it doesnt work 1.Try connecting the PC directly to the modem ( not router ) and see if it helps 2. If it does, try to reset the router once and try configuring again ( reset gets teh ...

...Does it have a fibre modem on the end of it? Does the modem have an ethernet-style socket? If the answer to all those is "yes", you should be able to connect it to the WAN socket on the

...socket and WAN socket). Leave the power on, do not disconnect the power Press the reset button and hold (use a paperclip) Keep the button pressed for 10 seconds Release the buttonThe router will now ...

...socket. The wire should go between your cable or DSL modem port which should only have one to the WAN port on your router. It probably has 5 ports. Some numbered 1-4 and the WAN or Internet port. The ...

...WAN socket on your router (This socket will be split away from the other 4 on the router), then turn on your router 1st then modem. Good Luck. If you are wanting to connect your PC/Router to the ...

...WAN socket on the rear of the router. Then you connect an ethernet cable from any one of the 4 lan ports to your computers ethernet socket. If your pc has a wireless adapter, you can disconnect this ...