Linksys Wireless-G Broadband Router "change ie default browser settings" Questions

...IE, the listed page will be the homepage. In Firefox, click Tools and then Options. Under the General Tab, you will be able to enter your homepage choice. Similar options exist for other browsers but ...

...ie To RESET the Netgear, power up the Netgear then press and hold the RESET button at the back of the router until all the LEDs flash. Connect a LAN cable from the Netgear to the LAN port on ...

you will be prompted to enter ID and password. Enter "admin" for ID and if needed the same for password. This will allow you to make any changes ie: SSID, WEP, WPA or change password. Hope this helps.

...password is blank (ie nothing unless you have changed it - this should have been done for protection) then go into the wireless settings and change the channel to whay you need and save the

...change the default admin password. You can now configure the wireless settings.ie. SSID (wireless network name) WPA or WPA2 encryption key.(wireless protection).  Now configure the wireless card ...

...change the default password. You can now configure the wireless settings (ie the security encryption key etc). Now configure the wireless card in your computer/laptop withthe router's wireless ...

...change the default admin password. You can now configure the wireless settings. Now configure the wireless card in your computer/laptop with the router’s wireless settings. ie security ...

...IE browser and enter the configuration IP address (http://192.168.0.1) the default login = admin and the PW = blank (just press enter) Then change to default password so it prevents anyone changing ...

...change the default admin password. You can now configure the wireless settings to protect your wireless network and Internet from unauthorized access ie the SSID and the WPA or WPA2 encryption. Now ...

...the default gateway has been changed and cannot be altered, Would setting it back to factory defaults reset the gateway to? Cheers You should reset the router. or change setting by access the ...