Linksys EtherFast Cable/DSL Router "wan light solid green" Questions

...WAN and Local Network 1,2,3, and 4. The following lights don't turn on when the unit is connected: Power, Status, WLAN. It doesn't allow me to connect to the internet. Please help. Thanks. If that is ...

...WAN light and LAN lights are solid when you are connected, and the connection is idle. The lights blink when traffic is present. The lights are off when there is no connection. if they stay on they ...

...WAN light solid green not blinking and the INTERNET light should be green and blinking. Thank you. What type router, and what type TV? Your best bet is to go to device setup and disable the WPS ...

...light blinks. If LAN or WAN cable is plugged in, their respective lights will flash on activity. Power light turns off for several seconds. All lights, except power light, turn on and then off. Power ...

...light is still green and solid on the router. Any ideas? ok , first enter your web router page configuration and check the WAN status if connected or not , is not call your ISP . if connected , check ...

WAN light on the router is on, turn on the computers and check if there is internet connection. If still no internet connection, contact your ISP. They might need to clone the mac address of router to

WAN and Port 1 Signal, still no luck after resetting the router, this happened after a power surge. Can this still be repaired? Thanks for your help... hey there , try this buddy remove all the cables

...WAN (Internet) light. It should be solid green or blinking. You should also be able to connect into the router using a web browser. http://192.168.0.1 enter the username and password. If it has never ...

...light turns back off. The wifi connection is iffy as well with random saved and secured kick offs blow too. Routers are rather sophisticated to se up. It would take far too long to deal with all the ...

...WAN (or Internet) light to blink even if it is 'probe' traffic trying to break in to your network. Such traffic is to be expected and is the reason you have firewall functionality in your gateway ...